2.0-13P ZZDK MS

This specification applies to the production and inspection of standard series strip connectors (pin headers) manufactured by our company. The product surface shall be free from defects, contamination, cracks, and mechanical damage detrimental to the product; contacts shall show no corrosion, oxidation of plating, or plating delamination. Dimensions shall conform to the attached drawings, and components of the same specification shall be interchangeable. Plastic parts shall be inner-packaged in plastic bags; terminals shall be inner-packaged in tape-and-reel format, with a certificate of conformity enclosed, indicating product name, specification/model, quantity, and date of manufacture. Outer packaging shall be cartons with a packing list attached, indicating product name, specification/model, quantity, and shipping date; products shall not rattle inside the carton. Transportation by any means is permitted; protect from moisture and mechanical damage. Packaged connectors shall be stored in a warehouse with ambient temperature of -10℃~+40℃, relative humidity ≤80%, and free from acidic, alkaline, or other corrosive gases. Operating temperature range: -25℃~+85℃; applicable wire gauge: AWG#22~#28; applicable PCB thickness: 1.2~1.6mm; rated voltage: 250V AC/DC; rated current: 2A; insulation resistance: ≥1000MΩ; dielectric withstanding voltage: 800V AC/minute.

Key features

• Material per attached table
• Plating per attached table
• Plastic surfaces shall be flat and smooth, free from burrs, bubbles, burn marks, deformation, gate drag marks, flash, or short shots
• Terminal surfaces free from oxidation and plating defects
• Compatible board thickness: 1.2mm~1.6mm
• Temperature range: -25℃~85℃
• Rated voltage: 250V AC/DC
• Rated current: 2A
• Insulation resistance: ≥1000MΩ
• Dielectric withstanding voltage: 800V AC/minute