2.0-3P WZDK MS

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The technical requirements are as follows: materials and plating specifications are detailed in the attached table; plastic surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, and deformation, with no gate pull marks, flash, or short shots; terminal surfaces shall be free from oxidation and plating defects. The applicable PCB thickness is 1.2mm~1.6mm, operating temperature range is -25℃~85℃, rated voltage is 250V AC/DC, rated current is 2A, insulation resistance ≥1000MΩ, and withstanding voltage is 800V AC/minute. Product surfaces shall be free from defects, contamination, cracks, and mechanical damage harmful to the product; contacts shall be free from corrosion, plating oxidation, and flaking; external dimensions shall conform to the attached drawings, and products of the same specification shall be interchangeable. Regarding packaging: plastic parts shall be inner-packaged in plastic bags; terminals shall be inner-packaged in tape-on-reel format, accompanied by a certificate of conformity indicating product name, specification/model, quantity, and production date; outer packaging shall be cartons affixed with a packing list stating product name, specification/model, quantity, and shipment date, with products secured against movement inside the carton. Transportation by any means is permitted; protect from moisture and mechanical damage. For storage, packaged connectors shall be kept in an environment with ambient temperature -10℃~+40℃ and relative humidity ≤80%, free from acidic, alkaline, and other corrosive gases in the warehouse air.