2.0-5P WZDK MS

This specification applies to the production and inspection of standard series strip connectors (pin headers) manufactured by our company. The technical requirements are as follows: materials and plating specifications are listed in the attached table; plastic part surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, and deformation, with no gate pull marks, flash, or short shots; terminal surfaces shall be free from oxidation and plating defects. The applicable PCB thickness is 1.2mm~1.6mm, operating temperature range is -25℃~85℃, rated voltage is 250V AC/DC, rated current is 2A, insulation resistance ≥ 1000MΩ, and withstanding voltage is 800V AC/minute. Product surfaces shall be free from harmful defects, contamination, cracks, and mechanical damage; contacts shall be free from corrosion, plating oxidation, and peeling. Dimensions shall conform to the attached drawings, and identical specifications shall be interchangeable. Regarding packaging: plastic parts shall be individually packed in plastic bags; terminals shall be packed in reel tape-and-reel packaging; a certificate of conformance shall be enclosed or affixed, indicating product name, specification/model, quantity, and production date; outer packaging shall be cartons with a packing list attached, indicating product name, specification/model, quantity, and shipping date, with no movement of products inside the carton. Transportation by any means is permitted; keep dry and protect from mechanical damage. For storage, packaged connectors shall be kept in an environment with ambient temperature -10℃~+40℃ and relative humidity ≤ 80%, and the warehouse air shall be free from acidic, alkaline, and other corrosive gases.