2.54-9P ZZDK MS

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The product surface shall be free from defects, dirt, cracks, and mechanical damage that are detrimental to the product; contacts shall show no signs of corrosion, oxidation of plating, or plating delamination. Outline dimensions shall conform to the attached drawings, and products of the same specification shall be interchangeable. Inner packaging for plastic parts consists of plastic bags; inner packaging for terminals consists of tape-and-reel packaging. A certificate of conformance shall be enclosed (or affixed), indicating product name, specification/model number, quantity, and date of manufacture. Outer packaging consists of cartons with a packing list attached, indicating product name, specification/model number, quantity, and shipping date; products shall not shift within the carton. Transportation by any means is permitted, provided the products are protected from moisture and mechanical damage. Packaged connectors shall be stored in a warehouse maintained at an ambient temperature of -10℃~+40℃, relative humidity ≤80%, and free from acidic, alkaline, or other corrosive gases in the surrounding air.

Key features

• Material: see attached table
• Plating: see attached table
• Plastic parts: smooth and clean surface, free from burrs, bubbles, burn marks, deformation, gate drag marks, flash, or short shots
• Terminals: free from oxidation or plating defects
• Compatible board thickness: 1.2mm~1.6mm
• Temperature range: -25℃~85℃
• Rated voltage: 250V AC/DC
• Rated current: 3A
• Contact resistance: ≤0.01Ω
• Insulation resistance: ≥1000MΩ
• Withstanding voltage: 1000V AC/minute