5264-2P ZZMS Socket Connector for PCB

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The product technical requirements are as follows: materials and plating are specified in the attached table; plastic part surfaces shall be smooth and clean, free from burrs, bubbles, burns, deformation, and other defects, with no gate pull marks, flash, or short shots; terminal surfaces shall be free from oxidation, poor plating, and similar defects. Applicable wire gauge: 28#~22#; applicable substrate thickness: 1.6mm; temperature range: -25℃~85℃; rated voltage: 250V AC/DC; rated current: 3A; contact resistance: ≤0.02Ω; insulation resistance: ≥1000MΩ; dielectric withstanding voltage: 1000V AC/minute. Product surfaces shall be free from harmful defects, contamination, cracks, and mechanical damage; contacts shall show no corrosion, plating oxidation, or peeling; external dimensions shall conform to the attached drawings; identical specifications shall be interchangeable. Regarding packaging: the inner packaging for plastic parts shall be plastic bags; the inner packaging for terminals shall be reel tape-and-reel packaging; a certificate of conformance shall be included or affixed, indicating product name, specification/model, quantity, and production date; the outer packaging shall be cartons with a packing list attached, indicating product name, specification/model, quantity, and shipping date; products shall not rattle inside the carton. Transportation by any means is permitted; products shall be protected from moisture and mechanical damage.