5499374-8

Coordinate dimensions are applied from the basic position. The 10-pin and 14-pin sizes contain only one slot for a snap-in polarizer (polarization), located as shown. The 10-pin size contains only one slot for dual polarization, located as shown. The recommended PCB thickness is 3.18 [.125]. This is the distance required for the ejector latch in the open position. Material: Housing and latch: glass-filled nylon or polyester, UL94V-0 rated, color per table. Contacts: phosphor bronze or brass. Contacts: In the selectively plated area, flash gold over palladium-nickel plating, minimum thickness 0.76μm [.000030]. Solder tail tin plating minimum thickness 2.54μm [.000100], nickel underplate over entire contact minimum thickness 1.27μm [.000050]. Alternatively, gold plating in the selectively plated area minimum thickness 0.76μm [.000030], solder tail tin plating minimum thickness 2.54μm [.000100], nickel underplate over entire contact minimum thickness 1.27μm [.000050]. Datums -M- and -N- are determined by the customer.