74VHC595FT

8-Bit Shift Register/Latch (3-state) The 74VHC595FT is an advanced high speed 8-BIT SHIFT REGISTER/LATCH fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. Shift operation is accomplished on the positive going transition of the SCK input. The output register is loaded with the contents of the shift register on the positive going transition of the RCK input. Since RCK and SCK signal are independent, parallel outputs can be held stable during the shift operation. And, since the parallel outputs are 3-state, it can be directly connected to 8-bit bus. This register can be used in serialto-parallel conversion, data receivers, etc. An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.

Applications

• serialto-parallel conversion
• data receivers

Key features

• AEC-Q100 (Rev. H)
• Wide operating temperature range: T(opr) = -40 to 125 ℃
• High speed: f(MAX) = 185 MHz (typ.) at V(CC) = 5.0 V
• Low power dissipation: I(CC) = 4.0 μA (max) at T(a) = 25 ℃
• High noise immunity: V(NIH) = V(NIL) = 28 % V(CC) (min)
• Power-down protection is provided on all inputs.
• Balanced propagation delays: Δt(PLH) ≈ t(PHL)
• Wide operating voltage range: V(CC(opr)) = 2.0 V to 5.5 V
• Low noise: V(OLP) = 1.0 V (max)
• Pin and function compatible with the 74 series (74AC/HC/AHC/LV etc.) 595 type.