AD4115BCPZ-RL7

The AD4115 is a low power, low noise, 24- bit, sigma- delta (Σ - Δ) analog- to- digital converter (ADC) that integrates an analog front end (AFE) for eight fully differential or 16 single- ended, high impedance (≥1MΩ), bipolar, ±10V voltage inputs. The AD4115 integrates key analog and digital signal conditioning blocks to configure eight individual setups for each analog input channel in use. The AD4115 features a maximum channel scan rate of 24,845kSPS (40.25μs) for fully settled data. The embedded 2.5V low drift (±5ppm / °C), band gap internal reference (with output reference buffer) reduces the external component count. The digital filter allows flexible settings, including simultaneous 50Hz and 60Hz rejection at a 27.27 SPS output data rate. The user can select different filter settings depending on the requirements of each channel in the application. The automatic channel sequencer enables the ADC to switch through each enabled channel. The precision performance of the AD4115 is achieved by integrating the proprietary iPassives technology. The AD4115 is factory calibrated to achieve a high degree of specified accuracy. The AD4115 operates with a single power supply that allows simplified use in galvanically isolated applications. The specified operating temperature range is - 40°C to +105°C. The AD4115 is housed in a 40- lead, 6mm×6mm LFCSP.

Applications

• Process control
• Programmable logic controller (PLC) and distributed control system (DCS) modules
• Instrumentation and measurement

Key features

• 24- bit ADC with integrated AFE
• Fast and flexible output rate: 2.5 SPS to 125 kSPS
• Channel scan data rate of 24,845 SPS per channel (40.25 us settling)
• 85 dB common mode rejection of 50Hz and 60Hz at 20 SPS per channel
• ±10V inputs, either 8 differential or 16 single- ended
• VIN pin absolute maximum rating ±65V
• Absolute input pin voltage up to ±20V
• Minimum 1 MΩ impedance
• On- chip 2.5V reference ±0.12% initial accuracy at 25°C, ±5ppm / °C (typical) drift
• Internal or external clock
• Power supplies AVDD = 4.5V to 5.5V, IOVDD = 2V to 5.5V
• Total current consumption AVDD + IOVDD (IDD) = 10.4mA
• Temperature range: - 40°C to +105°C
• 3- wire or 4- wire serial digital interface (Schmitt trigger on SCLK)
• SPI, QSPI, MICROWIRE, and DSP compatible