ADS7883SDBVT

The ADS7883 is a 12-bit, 3-MSPS analog-to-digital converter (ADC). The device includes a capacitor based SAR A/D converter with inherent sample and hold. The serial interface in the device is controlled by the CS（overline） and SCLK signals for glueless connections with microprocessors and DSPs. The input signal is sampled with the falling edge of CS, and SCLK is used for conversion and serial data output. The device operates from a wide supply range from 2.7 V to 5.5 V. The low power consumption of the device makes it suitable for battery-powered applications. The device also includes a power saving power-down feature for when the device is operated at lower conversion speeds. The high level of the digital input to the device is not limited to device VDD. Therefore the digital input can go as high as 5.5 V when the device supply is 2.7 V. This feature is useful when digital signals are received from another circuit with different supply levels. This also reduces restrictions on power-up sequencing. The ADS7883 is available in a 6-pin SOT23 package and is specified for operation from -40℃ to 125℃.

Applications

• Base Band Converters in Radio Communication
• Motor Current/Bus Voltage Sensors in Digital Drives
• Optical Networking (DWDM, MEMS Based Switching)
• Optical Sensors
• Battery Powered Systems
• Medical Instrumentations
• High-Speed Data Acquisition Systems
• High-Speed Closed-Loop Systems

Key features

• 3-MHz Sample Rate Serial Device
• 12-Bit Resolution
• Zero Latency
• 48-MHz Serial Interface
• Supply Range: 2.7 V to 5.5 V
• Low Power Dissipation: – 6.45 mW at 3-V VDD, 2 MSPS; 13.5 mW at 5-V VDD, 3 MSPS
• ±0.6 LSB INL, ±0.5 LSB DNL
• 72 dB SINAD, -84 dB THD
• Unipolar Input Range: 0 V to VDD
• Power-Down Current: 1 μA
• Wide Input Bandwidth: 30 MHz at 3 dB
• 6-Pin SOT23 Package