CLVTH16244AQDGGREP

2.7V~3.6V 4 4 TSSOP-48-6.2mm Buffers, Drivers, Receivers, Transceivers RoHS

TSSOP-48-6.2mmROHS3 CompliantActive

Manufacturer: TI
Manufacturer part #: CLVTH16244AQDGGREP
Store part #: C2859867
Package / case: TSSOP-48-6.2mm
Category: Buffers, Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

30 in stock

#C2859867

Stock & price checked 3 days ago

Quantity	Unit price	Pack price
1+	₹510.41	₹510.41
10+	₹437.66	₹4,376.60
30+	₹394.21	₹11,826.30
100+	₹350.56	₹35,056.00
500+	₹330.14	₹1,65,070.00
1,000+	₹321.24	₹3,21,240.00

Quantity (min 1)

1 × ₹510.41

₹510.41

excl. GST

₹602.28 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 2,000 per reel

CLVTH16244AQDGGREP

₹510.41 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Voltage - Supply: 2.7V~3.6V
Output Type: Tri-State
Operating Temperature: -40℃~+125℃
Quiescent Supply Current: 200uA
Function: Power-off isolation;Hot-swap support;Bus hold;Output enable
Current - Output High(IOH): 24mA
Series: LVTH
Current - Output Low(IOL): 24mA
Number of Bits per Element: 4
Number of Elements: 4

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 2,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.427 g

Overview

The SN74LVTH16244A is a 16-bit buffer and line driver designed for 3.3 V low-voltage VCC operation while providing TTL interface capability to 5 V system environments. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It features noninverting outputs and symmetric active-low output enable (OE) inputs. An active bus-hold circuit maintains unused or undriven inputs at a valid logic state. The use of pullup or pulldown resistors in conjunction with the bus-hold circuit is not recommended. When VCC is between 0 V and 1.5 V, the device is in a high-impedance state during power-up or power-down. However, to ensure the high-impedance state above 1.5 V, OE should be connected to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuit disables the outputs, preventing damaging backflow current when the device is powered down. The power-up 3-state circuit places the outputs in a high-impedance state during power-up and power-down, thereby preventing driver conflict.

Key features

Controlled baseline
Single assembly/test site, single manufacturing site
Extended temperature performance supporting -40℃ to 85℃, -40℃ to 125℃, and -55℃ to 125℃
Enhanced DMS (Diminished Manufacturing Sources) support; enhanced product change notification; qualified traceability
Member of Texas Instruments Widebus™ family
Designed with advanced ABT (Advanced BiCMOS Technology) for 3.3 V operation and low quiescent power consumption
Mixed-mode signal operation support (5 V input/output voltage at 3.3 V VCC)
Supports unregulated battery operation down to 2.7 V
Ioff and power-up 3-state support for hot insertion
Bus-hold on data inputs eliminates need for external pull-up/pull-down resistors
Latch-up performance exceeds 500 mA per JESD 17
ESD protection exceeds JESD 22: 2000-V Human Body Model (A114-A); 200 V Machine Model (A115-A)