CY74FCT2245ATPWR

The CY74FCT2245T contains eight noninverting, bidirectional buffers with 3-state outputs intended for bus-oriented applications. On-chip termination resistors at the outputs reduce system noise caused by reflections. For this reason, the CY74FCT2245T can replace the CY74FCT245T in an existing design. The CY74FCT2245T current-sinking capability is 12 mA at the A and B ports. The transmit/receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (active high) enables data from A ports to B ports; receive (active low) enables data from B ports to A ports. The output-enable (OE(overline)) input, when high, disables both the A and B ports by putting them in the high-impedance state. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Applications

• Bus interface applications

Key features

• Function and Pinout Compatible With FCT and F Logic
• 25-Ω Output Series Resistors to Reduce Transmission-Line Reflection Noise
• Edge-Rate Control Circuitry for Significantly Improved Noise Characteristics
• Ioff Supports Partial-Power-Down Mode Operation
• Fully Compatible With TTL Input and Output Logic Levels
• ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101)
• 12-mA Output Sink Current
• 15-mA Output Source Current
• 3-State Outputs