ISL4223EIRZ

The ISL3232E, ISL4221E, and ISL4223E devices are 2.7V to 5.5V powered RS-232 transmitters/receivers that meet EIA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. They provide ±15KV ESD protection (IEC61000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are PDAs, Palmtops, and hand-held products where the low operational power consumption and even lower standby power consumption are critical. Efficient on-chip charge pumps, coupled with manual and automatic powerdown functions, reduce the standby supply current to a 150nA trickle. The 5mmx5mm Quad Flat No-Lead (QFN) packaging and the use of small, low value capacitors ensure board space savings. Data rates greater than 250kbps are ensured at worst case load conditions. The ISL4221E is a 1 driver, 1 receiver device and the ISL3232E and ISL4223E are 2 driver, 2 receiver devices that, coupled with the 5mmx5mm QFN package, provide the industry's smallest, lowest power serial port suitable for PDAs, and hand-held applications. The 5mmx5mm QFN requires 40% less board area than a 20 Ld TSSOP, and is nearly 20% thinner. The ISL4221E and ISL4223E versions feature an automatic powerdown function that powers down the on-chip power supply and driver circuits. Automatic powerdown occurs when an attached peripheral device is shut off or the RS-232 cable is removed, and conserves system power automatically without changes to the hardware or operating system. The ISL4221E and ISL4223E power back up automatically when a valid RS-232 voltage is applied to any receiver input.

Applications

• Any space-constrained system requiring RS-232 ports
• Battery powered and portable equipment
• Hand-held products (GPS receivers, bar code scanners, etc.)
• PDAs and Palmtops, data cables
• Cellular/mobile phones, digital cameras

Key features

• Available in near chip scale QFN (5mmx5mm) package, which is 40% smaller than a 20 Ld TSSOP
• ESD protection for RS-232 I/O pins to ±15KV (IEC61000)
• Meets EIA/TIA-232 and V.28/V.24 specifications at 3V
• RS-232 compatible with VCC = 2.7V
• On-chip voltage converters require only four external 0.1μF capacitors
• Manual and automatic powerdown features (except ISL3232E)
• Receiver hysteresis for improved noise immunity
• Assured minimum data rate: 250kbps
• Wide power supply range: single +2.7V to +5.5V
• Low supply current in powerdown state: 150nA
• Pb-free (RoHS compliant)