MICROCHIP

KSZ9893RNXI

QFN-64-EP(8x8) Controllers RoHS

QFN-64-EP(8x8)ROHS3 CompliantActive

3-Port Gigabit Ethernet Switch with RGMII/MII/RMII Interface

Manufacturer: MICROCHIP
Manufacturer part #: KSZ9893RNXI
Store part #: C633484
Package / case: QFN-64-EP(8x8)
Category: Controllers
Packaging: Tray

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

37 in stock

#C633484

Stock & price checked 6 days ago

Quantity	Unit price	Pack price
1+	₹2,130.11	₹2,130.11
10+	₹2,035.50	₹20,355.00
30+	₹1,871.78	₹56,153.40
100+	₹1,728.76	₹1,72,876.00

Quantity (min 1)

1 × ₹2,130.11

₹2,130.11

excl. GST

₹2,513.53 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 260 per tray

KSZ9893RNXI

₹2,130.11 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Features: Remote fault detection;Low-power mode;Port independent power-down
MAC Address Support: 4096
MAC Interface: RGMII;MII;RMII
Number of Channels: 3
Voltage - Supply: 1.8V;2.5V;3.3V
Integrated PHY: Yes
Communication Interface: SPI;I2C;MIIM
Operating Temperature: -40℃~+85℃
VLAN Support: 128
Ethernet Speed Standards: 10BASE-T;100BASE-TX;1000BASE-T
Data Rate: 10Mbit/s;100Mbit/s;1000Mbit/s
Memory Space: 128KB

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tray
Standard pack: 260 / Tray
Sold per: Piece
Minimum order: 1
Unit weight: 2.16 g

Overview

Applications

Stand-alone 10/100/1000Mbps Ethernet switches
VoIP infrastructure switches
Broadband gateways/firewalls
Wi-Fi access points
Integrated DSL/cable modems
Security/surveillance systems
Industrial control/automation switches
Networked measurement and control systems

Key features

Non-blocking wire-speed Ethernet switching fabric
Full-featured forwarding and filtering control, including Access Control List (ACL) filtering
Full VLAN and QoS support
Two ports with integrated 10/100/1000BASE-T PHYs
One port with 10/100/1000 Ethernet MAC and configurable RGMII/MII/RMII interface
IEEE 802.1X port-based authentication support
EtherGreen™ power management features, including low power standby and IEEE 802.3az
Flexible management interface options: SPI, I²C, MIIM, and in-band management via any port
Commercial/Industrial temperature range support
64-pin VQFN (8×8mm) lead-free package
Switch Management Capabilities:
10/100/1000Mbps Ethernet switch basic functions: frame buffer management, address look-up table, queue management, MIB counters
Non-blocking store-and-forward switch fabric assures fast packet delivery by utilizing 4096 entry forwarding table with 128kByte frame buffer
Jumbo packet support up to 9000 bytes
Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port
MIB counters for fully-compliant statistics gathering 34 counters per port
Tail tagging mode (one byte added before FCS) support at host port to inform the processor which ingress port receives the packet and its priority
Loopback modes for remote failure diagnostics
Rapid spanning tree protocol (RSTP) support for topology management and ring/linear recovery
Multiple spanning tree protocol (MSTP) support
Two Integrated PHY Ports:
1000BASE-T/100BASE-TX/10BASE-T IEEE 802.3
Fast Link-up option significantly reduces link-up time
Auto-negotiation and Auto-MDI/MDI-X support
Energy-Efficient Ethernet (EEE) support with lowpower idle mode and clock stoppage
On-chip termination resistors and internal biasing for differential pairs to reduce power
LinkMD cable diagnostic capabilities for determining cable opens, shorts, and length
One Configurable External MAC Port:
Reduced Gigabit Media Independent Interface (RGMII) v2.0
Reduced Media Independent Interface (RMII) v1.2 with 50MHz reference clock input/output option
Media Independent Interface (MII) in PHY/MAC mode
Advanced Switch Capabilities:
IEEE 802.1Q VLAN support for 128 active VLAN groups and the full range of 4096 VLAN IDs
IEEE 802.1p/Q tag insertion/removal on per port basis
VLAN ID tag/untag options on per port or VLAN basis
IEEE 802.3x full-duplex flow control and half-duplex back pressure collision control
IEEE 802.1X (Port-Based Network Access Control)
IGMP v1/v2/v3 snooping for multicast packet filtering
IPv6 multicast listener discovery (MLD) snooping
IPv4/IPv6 QoS support, QoS/CoS packet prioritization
802.1p QoS packet classification with 4 priority queues
Programmable rate limiting at ingress/egress ports
Broadcast storm protection
Four priority queues with dynamic packet mapping for IEEE 802.1p, IPv4 DIFFSERV, IPv6 Traffic Class
MAC filtering function to filter or forward unknown unicast, multicast and VLAN packets
Self-address filtering for implementing ring topologies
Comprehensive Configuration Registers Access:
High-speed 4-wire SPI (up to 50MHz), I²C interfaces provide access to all internal registers
MII Management (MIIM, MDC/MDIO 2-wire) Interface provides access to all PHY registers
In-band management via any of the three ports
I/O pin strapping facility to set certain register bits from I/O pins at reset time
On-the-fly configurable control registers
Power Management:
IEEE 802.3az Energy Efficient Ethernet (EEE)
Energy detect power-down mode on cable disconnect Dynamic clock tree control
Unused ports can be individually powered down
Full-chip software power-down
Wake-on-LAN (WoL) standby power mode