ADI

LTM4604IV#PBF

Step-down type 800mV~5V 2.375V~5.5V LGA-66(9x15) DC DC Converters RoHS

LGA-66(9x15)ROHS3 CompliantActive

Low Voltage, 4A DC/DC μModule Regulator with Tracking

Manufacturer: ADI
Manufacturer part #: LTM4604IV#PBF
Store part #: C581095
Package / case: LGA-66(9x15)
Category: DC DC Converters
Packaging: Tray

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

3 in stock

#C581095

Stock & price checked 38 h ago

Quantity	Unit price	Pack price
1+	₹4,738.72	₹4,738.72
10+	₹4,589.21	₹45,892.10

Quantity (min 1)

1 × ₹4,738.72

₹4,738.72

excl. GST

₹5,591.69 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 170 per tray

LTM4604IV#PBF

₹4,738.72 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Function: Step-down type
Output Voltage: 800mV~5V
Ripple Noise: 10mVp-p
Operating Temperature: -40℃~+85℃
Quiescent Supply Current: 60uA
Voltage - Supply: 2.375V~5.5V
Capacitive Load(Max): 66uF
Number of Outputs: 1
Iout: 4A
Output Voltage Accuracy: ±2%
Height: 2.32mm
Frequency - Switching: 1.25MHz
Features: Programmable soft start;Programmable output voltage;Power-on timing control;Over Current Protection;Overvoltage protection;Under Voltage Protection;Over-temperature protection
Length: 15mm
Width: 9mm

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tray
Standard pack: 170 / Tray
Sold per: Piece
Minimum order: 1
Unit weight: 1.12 g

Overview

The LTM4604 is a complete 4A switch mode step-down µModule (micromodule) regulator. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 2.375V to 5.5V, the LTM4604 supports an output voltage range of 0.8V to 5V, set by a single resistor. This high efficiency design delivers up to 4A continuous current (5A peak). Only bulk input and output capacitors are needed to complete the design. The low profile package (2.32mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability. The device supports output voltage tracking for supply rail sequencing. Fault protection features include foldback current protection, thermal shutdown and a programmable soft-start function. The LTM4604 is offered in a RoHS compliant 15mm×9mm×2.32mm LGA package.