LTM4649EY#PBF

A complete 10A high efficiency switching mode step-down DC/DC µModule regulator in a 9mm × 15mm × 4.92 BGA package. Included in the package are the switching controller, power FETs, inductor, and all support components. Operating over an input voltage range of 4.5V to 16V, it supports an output voltage range of 0.6V to 3.3V, set by a single external resistor. This high efficiency design delivers 10A continuous current. Only bulk input and output capacitors are needed. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability. The device supports frequency synchronization, programmable multiphase operation, and output voltage tracking for supply rail sequencing. Fault protection features include output overvoltage and overcurrent protection. It is offered in a small 9mm × 15mm × 4.92mm BGA package available with SnPb or RoHS compliant terminal finish.

Applications

• Telecom, Networking and Industrial Equipment Point of Load Regulation

Key features

• 10A DC Output Current
• Input Voltage Range: 4.5V to 16V
• Output Voltage Range: 0.6V Up to 3.3V
• No Heat Sink or Current Derating Up to 85°C Ambient Temperature
• ±1.5% Total DC Voltage Output Error
• Multiphase Operation with Current Sharing
• Remote Sense Amplifier
• Built-In General Purpose Temperature Monitor
• Selectable Pulse-Skipping Mode/Burst Mode Operation for High Efficiency at Light Load
• Soft-Start/Voltage Tracking
• Protection: Output Overvoltage and Overcurrent Foldback
• 9mm × 15mm × 4.92mm BGA Package