MAXIM

MAX110BCPE+

SPI 4.75V~5.25V PDIP-16 Analog to Digital Converters (ADC) RoHS

PDIP-16ROHS3 CompliantActive

Low-Cost, 2-Channel, ±14-Bit Serial ADCs

Manufacturer: MAXIM
Manufacturer part #: MAX110BCPE+
Store part #: C490320
Package / case: PDIP-16
Category: Analog to Digital Converters (ADC)
Packaging: Tube-packed

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

5 in stock

#C490320

Stock & price checked 20 h ago

Quantity	Unit price	Pack price
1+	₹2,102.96	₹2,102.96
10+	₹2,038.73	₹20,387.30

Quantity (min 1)

1 × ₹2,102.96

₹2,102.96

excl. GST

₹2,481.49 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 25 per tube

MAX110BCPE+

₹2,102.96 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Operating Temperature: 0℃~+70℃
Interface: SPI
Quiescent Current (Iq): 550uA
Voltage - Supply: 4.75V~5.25V
Number of Channels: 2
Voltage Reference: External
Clock/Oscillator: Built-in;External
Clock Frequency: 1MHz;250kHz~1.25MHz
Features: Bipolar power supply;Auto calibration;Multiplexers
Resolution(Bits): 50Hz;14
ADC architecture: Sigma-Delta
Programmable Gain: Not supported

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tube-packed
Standard pack: 25 / Tube
Sold per: Piece
Minimum order: 1
Unit weight: 1.1 g

Overview

The MAX110/MAX111 analog-to-digital converters (ADCs) use an internal auto-calibration technique to achieve 14-bit resolution plus overrange, with no external components. Operating supply current is only 550μA (MAX110) and reduces to 4μA in power-down mode, making these ADCs ideal for high-resolution battery-powered or remote-sensing applications. A fast serial interface simplifies signal routing and opto-isolation, saves microcontroller pins, and offers compatibility with SPI, QSPI, and MICROWIRE. The MAX110 operates with ±5V supplies, and converts differential analog signals in the -3V to +3V range. The MAX111 operates with a single +5V supply and converts differential analog signals in the ±1.5V range, or single-ended signals in the 0V to +1.5V range. Internal calibration allows for both offset and gain-error correction under microprocessor (μP) control. Both devices are available in space-saving 16-pin DIP and SO packages, as well as an even smaller 20-pin SSOP package.

Applications

Process Control
Weigh Scales
Panel Meters
Data-Acquisition Systems
Temperature Measurement

Key features

Use an internal auto-calibration technique to achieve 14-bit resolution plus overrange, with no external components
Operating supply current is only 550μA (MAX110) and reduces to 4μA in power-down mode
A fast serial interface simplifies signal routing and opto-isolation, saves microcontroller pins, and offers compatibility with SPI, QSPI, and MICROWIRE
The MAX110 operates with ±5V supplies, and converts differential analog signals in the -3V to +3V range
The MAX111 operates with a single +5V supply and converts differential analog signals in the ±1.5V range, or single-ended signals in the 0V to +1.5V range
Internal calibration allows for both offset and gain-error correction under microprocessor (μP) control
Available in space-saving 16-pin DIP and SO packages, as well as an even smaller 20-pin SSOP package