MAXIM

MAX14827AAWA+T

WLP-25(2.5x2.5) Drivers, Receivers, Transceivers RoHS

WLP-25(2.5x2.5)ROHS3 CompliantActive

Low-Power, Ultra-Small, Dual Driver, IO-Link Device Transceiver

Manufacturer: MAXIM
Manufacturer part #: MAX14827AAWA+T
Store part #: C2672352
Package / case: WLP-25(2.5x2.5)
Category: Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

9 in stock

#C2672352

Stock & price checked 2 days ago

Quantity	Unit price	Pack price
1+	₹2,625.11	₹2,625.11
10+	₹2,492.81	₹24,928.10
30+	₹2,263.44	₹67,903.20
100+	₹2,063.47	₹2,06,347.00

Quantity (min 1)

1 × ₹2,625.11

₹2,625.11

excl. GST

₹3,097.63 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 2,500 per reel

MAX14827AAWA+T

₹2,625.11 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 2,500 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.001 g

Overview

The MAX14827A integrates the high-voltage functions commonly found in industrial sensors, including driv- ers and regulators. The MAX14827A features two ultra low-power drivers with active reverse-polarity protection. Operation is specified for normal 24V supply voltages up to 60V. Transient protection is simplified due to high volt- age tolerance allowing the use of micro TVS. The device features a flexible control interface. Pincontrol logic inputs allow for operation with switching sen- sors that do not use a microcontroller. For sensors that use a microcontroller, an SPI interface is available with extensive diagnostics. For IO-Link operation, a three-wire UART interface is provided, allowing interfacing to the microcontroller UART. Finally, a multiplexed UART/SPI option allows using one serial microcontroller interface for shared SPI and UART interfaces. The device includes on-board 3.3V and 5V linear regula- tors for low-noise analog/logic supply rails. The MAX14827A is available in a (4mm×4mm) 24-pin TQFN package and a (2.5mm × 2.5mm) 25-pin waferlevel package (WLP) and is specified over the extended -40℃ to +125℃ temperature range.

Applications

Industrial sensors
IO-Link sensors and actuators
Safety applications

Key features

Low Power Dissipation for Small Sensors
2.3Ω/2.7Ω (typ) Driver On-Resistance
70mW (typ) Power Dissipation at 100mA (When Both C/Q and DO Drivers Are Driving)
Auxiliary 24V Digital Output and Input
Selectable Driver Current: 50mA to 250mA
SPI/Pin-Control Interface for Configuration and Monitoring
Multiplexed SPI/UART Interface Option
5V and 3.3V Linear Regulators Optional External Transistor Supports Higher Regulator Load Capability
Integrated LED Driver
Selectable Driver Integrated Protection Enables Robust Communication
65V Absolute Maximum Ratings on Interface and Supply Pins Allows for Flexible TVS Protection
9V to 60V Specified Operation
Glitch Filters for Improved Burst Resilience and Noise
Thermal Shutdown Auto-Retry Cycling
Hot-Plug Supply Protection
Reverse Polarity Protection of All Sensor Interface Inputs/Outputs
-40℃ to +125℃ Operating Temperature Range