MAX22501EAUA+

The MAX22500E/MAX22501E half-duplex ESD-protected RS-485/RS-422 transceivers are optimized for high-speed (up to 100Mbps) communication over long cables. These transceivers feature integrated hot-swap protection and a fail-safe receiver, ensuring a logic-high on the receiver output when input signals are shorted or open for longer than 10μs (typ). The MAX22500E features integrated preemphasis circuitry that extends the distance and increases the data rate of reliable communication by reducing inter-symbol interference (ISI) caused by long cables. The MAX22500E features a flexible logic interface down to 1.6V. The MAX22501E operates without preemphasis and is powered from a 3V to 5.5V supply. The MAX22500E is available in a 10-pin TDFN-EP package. The MAX22501E is available in a 8-pin TDFN-EP package and an 8-pin μMAX package. Both transceivers operate over the -40℃ to +125℃ ambient temperature range.

Applications

• Motion Control
• Encoder Interfaces
• Field Bus Networks
• Industrial Control Systems
• Backplane Busses

Key features

• High-Speed Operation Over Long Distances
• Up to 100Mbps Data Rate Integrated Preemphasis Extends Cable Length (MAX22500E)
• High Receiver Sensitivity
• Wide Receiver Bandwidth
• Symmetrical Receiver Thresholds
• Integrated Protection Increases Robustness
• -15V to +15V Common Mode Range
• ±15kV ESD Protection (Human Body Model)
• ±7kV IEC 61000-4-2 Air-Gap ESD Protection
• ±6kV IEC 61000-4-2 Contact Discharge ESD Protection
• Withstands up to ±4kV EFT Driver Outputs are Short-Circuit Protected
• Flexibility for Many Different Applications
• 3V to 5.5V Supply Range
• Low Voltage Logic Supply Down to 1.6V (MAX22500E)
• Low 5μA (max) Shutdown Current
• Available in 8-pin or 10-pin TDFN Package and an 8-pin μMAX Package
• -40℃ to +125℃ Operating Temperature Range