MICROCHIP

MCP2003BT-E/MF

DFN-8-EP(2x3) Drivers, Receivers, Transceivers RoHS

DFN-8-EP(2x3)ROHS3 CompliantActive

LIN Transceiver

Manufacturer: MICROCHIP
Manufacturer part #: MCP2003BT-E/MF
Store part #: C623150
Package / case: DFN-8-EP(2x3)
Category: Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

10 in stock

#C623150

Stock & price checked 3 days ago

Quantity	Unit price	Pack price
1+	₹202.42	₹202.42
10+	₹197.42	₹1,974.20
30+	₹193.94	₹5,818.20
100+	₹190.45	₹19,045.00

Quantity (min 1)

1 × ₹202.42

₹202.42

excl. GST

₹238.86 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 3,300 per reel

MCP2003BT-E/MF

₹202.42 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Features: Local wake-up;Bus wake-up;Low-power mode;Bus fault protection;Thermal shutdown protection;Under-voltage detection;Slope control;TXD timeout protection

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 3,300 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.75 g

Overview

This device provides a bidirectional, half-duplex communication, physical interface to automotive and industrial LIN systems to meet the LIN Bus Specification Revision 2.2, SAE J2602, and ISO 17987. The device is both short-circuit and overtemperature protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements.

Key features

The MCP2003B is Compliant with Local Interconnect Network (LIN) Bus Specifications 1.3, 2.0, 2.1, 2.2, SAE J2602, and ISO17987
Supports Baud Rates up to 20 Kbaud with LIN-Compatible Output Driver
60V Load Dump Protected
Very High Electromagnetic Immunity (EMI) Meets Stringent Original Equipment Manufacturers (OEM) Requirements
Direct Capacitor Coupling Robustness without Transient Voltage Suppressor (TVS): - ±35V on LBUS (SAE J2962 - 1) - ±85V on LBUS (SAE J2962 - 1)
High Electrostatic Discharge (ESD) Immunity without TVS: - >25 kV on LBUS (SAE J2962 - 1) - >15 kV on VBB (IEC 61000 - 4 - 2) - >6 kV on LBUS (IEC 61000 - 4 - 2)
Very High Immunity to RF Disturbances Meets Stringent OEM Requirements
Wide Supply Voltage: 5.5V - 30.0V Continuous
Extended (E) Temperature Range: -40°C to +125°C
High (H) Temperature Range: -40°C to +150°C
Interfaces to P|C(B) MCU EUSART and Standard USARTs
LIN Bus Pin: - Internal pull - up resistor and diode - Protected against battery shorts - Protected against loss of ground - High current drive: >40 mA
Automatic Thermal Shutdown
Low - Power Mode: - Receiver monitoring bus and transmitter off: (≅5 μA)