MCP2021-500E/MD

Transceiver 6V~18V 20Kbps DFN-8-EP(4x4) Drivers, Receivers, Transceivers

DFN-8-EP(4x4)RoHSActive

LIN Transceiver with Voltage Regulator

Manufacturer: MICROCHIP
Manufacturer part #: MCP2021-500E/MD
Store part #: C637682
Package / case: DFN-8-EP(4x4)
Category: Drivers, Receivers, Transceivers
Packaging: Tube-packed

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

40 in stock

#C637682

Stock & price checked 6 days ago

Quantity	Unit price	Pack price
1+	₹518.52	₹518.52
10+	₹443.68	₹4,436.80
30+	₹399.40	₹11,982.00
91+	₹354.30	₹32,241.30
455+	₹333.58	₹1,51,778.90
1,001+	₹324.36	₹3,24,684.36

Quantity (min 1)

1 × ₹518.52

₹518.52

excl. GST

₹611.85 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 91 per tube

MCP2021-500E/MD

₹518.52 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Type: Transceiver
Voltage - Supply: 6V~18V
number of channels: 1
Data Rate: 20Kbps
Operating Temperature: -40℃~+125℃
ESD Protect: ±8kV
Features: Local wake-up;Bus wake-up;Low-power mode;Bus fault protection;Thermal shutdown protection;Under-voltage detection;Slope control
Quiescent Supply Current: 16uA

Packaging & compliance

RoHS: RoHS
Lifecycle: Active
ECCN: EAR99
Packaging: Tube-packed
Standard pack: 91 / Tube
Sold per: Piece
Minimum order: 1
Unit weight: 0.594 g

Overview

The MCP2021/2/1P/2P provides a bidirectional, halfduplex communication physical interface to automotive and industrial LIN systems that meets the LIN bus specification Revision 2.1 and SAE J2602-2. The devices incorporate a voltage regulator with 5V at 50 mA or 3.3V at 50 mA regulated power-supply outputs. The regulator is short-circuit protected, and is protected by an internal thermal shutdown circuit. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements.

Applications

automotive
industrial

Key features

Compliant with LIN Bus Specifications 1.3, 2.1 and are Compliant to SAE J2602-2
Support Baud Rates up to 20 kBaud with LIN-compatible Output Driver
43V Load Dump Protected
Very Low EMI Meets Stringent OEM Requirements
Wide Supply Voltage, 6.0V - 18.0V Continuous: Maximum input voltage of 30V
Extended Temperature Range: -40 to +125°C
Interface to PC(I²C) EUSART and Standard USARTs
Local Interconnect Network (LIN) Bus Pin: Internal pull-up resistor and diode; Protected against ground shorts; Protected against loss of ground; High-current drive
Automatic Thermal Shutdown
On-Chip Voltage Regulator: Output voltage of 5.0V with tolerances of ±3% overtemperature range; Available with alternate output voltage of 3.3V with tolerances of ±3% overtemperature range; Maximum continuous input voltage of 30V; Internal thermal overload protection; Internal short circuit current limit; External components limited to filter capacitor and load capacitor
Two Low-Power modes: Receiver On, Transmitter Off, Voltage Regulator On (≅85 μA); Receiver Monitoring Bus, Transmitter Off, Voltage Regulator Off (≅16 μA)