MICROCHIP

MCP2021AT-500E/MD

Transceiver 6V~18V DFN-8-EP(4x4) Drivers, Receivers, Transceivers RoHS

DFN-8-EP(4x4)ROHS CompliantActive

LIN Transceiver with Voltage Regulator

Manufacturer: MICROCHIP
Manufacturer part #: MCP2021AT-500E/MD
Store part #: C623163
Package / case: DFN-8-EP(4x4)
Category: Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

25 in stock

#C623163

Stock & price checked 5 days ago

Quantity	Unit price	Pack price
1+	₹351.90	₹351.90
10+	₹344.09	₹3,440.90
30+	₹338.87	₹10,166.10
100+	₹333.66	₹33,366.00

Quantity (min 1)

1 × ₹351.90

₹351.90

excl. GST

₹415.24 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 3,300 per reel

MCP2021AT-500E/MD

₹351.90 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Type: Transceiver
Voltage - Supply: 6V~18V
number of channels: 1
Operating Temperature: -40℃~+125℃
ESD Protect: ±15kV
Features: Local wake-up;Bus wake-up;Low-power mode;Bus fault protection;Thermal shutdown protection;TXD timeout protection;Slope control
Quiescent Supply Current: 8uA

Packaging & compliance

RoHS: ROHS Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 3,300 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.148 g

Overview

The MCP2021A/2A provide a bidirectional, half-duplex communication physical interface to meet the LIN bus specification Revision 2.1 and SAE J2602-2. The devices incorporate a voltage regulator with 5V or 3.3V at 70 mA regulated power supply output. The devices have been designed to meet the stringent quiescent current requirements of the automotive industry and will survive +43V load dump transients and double battery jumps.

Applications

automotive
industrial

Key features

The MCP2021A/2A are compliant with LIN Bus Specifications Version 1.3, 2.1 and with SAE J2602-2
Support Baud Rates up to 20 kBaud
43V Load Dump Protected
Maximum Continuous Input Voltage: 30V
Wide LIN-Compliant Supply Voltage: 6.0 – 18.0V
Extended Temperature Range: -40 to +125°C
Interface to P|C(B) MCU EUSART and Standard USARTs
Wake-Up on LIN Bus Activity or Local Wake Input
Local Interconnect Network (LIN) Bus Pin: - Internal Pull-Up Termination Resistor and Diode for Slave Node - Protected Against VBAT Shorts - Protected Against Loss of Ground - High-Current Drive
TXD and LIN Bus Dominant Time-Out Function
Two Low-Power Modes: - Transmitter Off: 90 μA (typical) - Power Down: 4.5 μA (typical)
Output Indicating Internal Reset State (POR or Sleep Wake)
MCP2021A/2A On-Chip Voltage Regulator: - Output Voltage of 5.0V or 3.3V at 70 mA Capability with Tolerances of ±3% Over the Temperature Range - Internal Short Circuit Current Limit - External Components Limited to Filter Capacitor and Load Capacitor
Automatic Thermal Shutdown
High Electromagnetic Immunity (EMI), Low Electromagnetic Emission (EME)
Robust ESD Performance: ±15 kV for LBUS and VBB pin (IEC61000-4-2)
Transient Protection for LBUS and VBB Pins in Automotive Environment (ISO7637)
Meets Stringent Automotive Design Requirements, including “OEM Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Version 1.2, March 2011
Multiple Package Options, including Small 4x4 mm DFN Package