MICROCHIP

MCP2544FDT-E/MF

TDFN-8-EP(2x3) Drivers, Receivers, Transceivers RoHS

TDFN-8-EP(2x3)ROHS3 CompliantActive

CAN FD Transceiver with Wake-up Pattern (WUP) Option

Manufacturer: MICROCHIP
Manufacturer part #: MCP2544FDT-E/MF
Store part #: C623199
Package / case: TDFN-8-EP(2x3)
Category: Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

27 in stock

#C623199

Stock & price checked 5 days ago

Quantity	Unit price	Pack price
1+	₹225.28	₹225.28
10+	₹219.86	₹2,198.60
30+	₹216.39	₹6,491.70
100+	₹212.92	₹21,292.00

Quantity (min 1)

1 × ₹225.28

₹225.28

excl. GST

₹265.83 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 3,300 per reel

MCP2544FDT-E/MF

₹225.28 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Features: Low-power mode;Wake-up function;Short-Circuit Protection;Thermal shutdown protection;Undervoltage Protection;Bus fault protection;ESD protection;Integrated level shifting

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 3,300 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.259 g

Overview

The MCP2542FD/4FD and MCP2542WFD/4WFD CAN transceiver family is designed for high-speed CAN FD applications of up to 8 Mbps communication speed. The maximum propagation delay was improved to support longer bus length. The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current, Electromagnetic Compatibility (EMC) and Electrostatic Discharge (ESD).

Applications

CAN 2.0 and CAN FD networks in automotive
CAN 2.0 and CAN FD networks in industrial
CAN 2.0 and CAN FD networks in medical
CAN 2.0 and CAN FD networks in consumer applications

Key features

Supports CAN 2.0 and CAN with Flexible Data-Rate (CAN FD) Physical Layer Transceiver Requirements
Optimized for CAN FD at 2, 5 and 8 Mbps Operation:
Maximum propagation delay: 120 ns
Loop delay symmetry: -10%/+10% (2 Mbps)
MCP2542FD/4FD:
Wake-up on CAN activity, 3.6 μs filter time
MCP2542WFD/4WFD:
Wake-up on Pattern (WUP), as specified in ISO 11898-2:2016, 3.6 μs activity filter time
Implements ISO 11898-2:2016
Qualified According to AEC-Q100 Rev. G
Very Low Standby Current (4 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered:
An unpowered node or brown-out event will not load the CAN bus
Device is unpowered if VDD or VIO drop below its POR level
Detection of Ground Fault:
Permanent dominant detection on TXD
Permanent dominant detection on bus
Automatic Thermal Shutdown Protection
Suitable for 12V and 24V Systems
Meets or Exceeds Stringent Automotive Design Requirements, Including “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Version 1.3, May 2012:
Conducted emissions @ 2 Mbps with Common-Mode Choke (CMC)
Direct Power Injection (DPI) @ 2 Mbps with CMC
Meets SAE J2962/2 “Communication Transceiver Qualification Requirements - CAN”:
Radiated emissions @ 2 Mbps without a CMC
High Electrostatic Discharge (ESD) Protection on CANH and CANL, meeting IEC61000-4-2 up to ±13 kV
Temperature Ranges:
Extended (E): -40°C to +125°C
High (H): -40°C to +150°C