MIC2555-0YML-TR

Transceiver 12Mbps MLF-24-EP(4x4) Drivers, Receivers, Transceivers RoHS

MLF-24-EP(4x4)ROHS3 CompliantActive

USB OTG Transceiver

Manufacturer: MICROCHIP
Manufacturer part #: MIC2555-0YML-TR
Store part #: C621801
Package / case: MLF-24-EP(4x4)
Category: Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

10 in stock

#C621801

Stock & price checked 3 days ago

Quantity	Unit price	Pack price
1+	₹828.50	₹828.50
10+	₹810.17	₹8,101.70
30+	₹797.66	₹23,929.80
100+	₹785.36	₹78,536.00

Quantity (min 1)

1 × ₹828.50

₹828.50

excl. GST

₹977.63 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 5,000 per reel

MIC2555-0YML-TR

₹828.50 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Type: Transceiver
Voltage - Supply: 3V~4.5V;1.6V~4.5V
Data Rate: 12Mbps
Operating Temperature: -40℃~+85℃
Features: Shutdown mode;Low-power mode
Supply Current: 40mA
Quiescent Supply Current: 250uA

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 5,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.179 g

Overview

A USB On-The-Go (OTG) transceiver designed to enable intelligent self-powered devices to communicate on a peer-to-peer basis with other USB and USB OTG enabled devices. Designed to perform as a PHY for USB Serial Interface Engines (SIE), it is compatible with a wide variety of stand-alone OTG SIE chips, OTG IP cores (used in ASIC and COT designs), and Application Specific Standard Products (ASSPs). It is fully compliant to USB-IF’s Universal Serial Bus Specification 2.0 and the On-the-Go Supplement Rev 1.0a, for low-speed and full-speed operation, and allows dual-role device (DRD) operation via an I²C-based controller interface. The controller’s robust register set permits full control over bus and interface activity for transacting Session Request Protocol (SRP) and Host Negation Protocol (HNP) sequences. Messaging between Host and Target devices can utilize either USB or UART signaling methods. Additionally, it permits audio signaling on its D+, D–, and ID lines in support of analog car kit applications. USB communication is complemented with on-chip D+, D– pull-up/pull-down resistors, an integrated charge pump and low dropout voltage regulators to provide stable internal supply voltages and to supply VBUS power when operating as an A-device. Logic input levels spanning 1.6V to 4.5V ensure compatibility with current and future generations of process technology. It is offered in a space-saving 4 mm x 4 mm 24-pin QFN package.

Applications

Cellular Telephones
PDAs
Digital Still Cameras
Camcorders
Data Cradles
CD and MP3 players
Printers

Key features

Complies with USB-IF USB Standard 2.0 and OTG Supplement Revision 1.0a
Provides Signaling and Control Logic for SRP and HNP, Enabling USB Dual-Role Device Operation
Designed for Full-Speed and Low-Speed USB Communications
I2C Controller Interface
Offers Three Modes of Operation: - USB - UART - Audio
Operates with V_LOGIC of 1.6V to 4.5V, Assuring Compatibility with Low Voltage ASICs
Tri-Level ID Detection for Recognition of USB and non-USB Devices
Supports USB/Car Kit Audio Interface
Allows Single-Ended and Differential Logic I/O
Integrated Charge Pump for VBUS Supply
On-Chip Pull-Up, Pull-Down Resistors Minimize External Component Count
Suspend and Power-Down Modes for Power Conservation
Operates over the Full Industrial Temperature Range: -40°C to +85°C