PHB2.0-2x4PWZDK

This product is a pin header with model number PHB2.0-2×4PWZDK. Technical requirements include materials and plating as specified in the attached table; plastic surfaces shall be smooth and clean, free from burrs, bubbles, and other defects; terminal surfaces shall be free from oxidation, poor plating, and similar issues. The temperature range is -25℃~85℃, rated voltage is 250V AC/DC, rated current is 3A AC/DC, contact resistance ≤0.02Ω, insulation resistance ≥1000MΩ, withstanding voltage is 800V AC/minute, and applicable PCB thickness is 1.6mm. The operating temperature range is -25℃~+85℃, and the applicable wire gauge is AWG#28~#22. The product surface shall be free from harmful defects, dirt, cracks, and mechanical damage; contacts shall be free from corrosion, plating oxidation, and peeling; external dimensions shall conform to the attached drawing; units of the same specification shall be interchangeable. Regarding packaging, plastic parts shall be inner-packed in plastic bags; terminals shall be inner-packed in reel tape-and-reel packaging, labeled with product name, model number, and other relevant information; outer packaging shall be cartons affixed with packing lists indicating relevant information, with products secured to prevent movement inside the carton. Transportation by any means is permitted, but products must be protected from moisture and mechanical damage. For storage, fully packaged connectors shall be kept in a warehouse maintained at -10℃~+40℃, relative humidity ≤80%, free from acidic, alkaline, and other corrosive gases.