PHB2.0-2x6PWZDK

This specification applies to the production and inspection of standard series strip connectors (pin headers). The technical requirements are as follows: materials and plating are specified in the attached table; plastic surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, and deformation; gates shall show no drag marks, flash, or short shots; terminal surfaces shall be free from oxidation and plating defects. Operating temperature range: -25℃~85℃; rated voltage: 250V AC/DC; rated current: 3A AC/DC; contact resistance: ≤0.02Ω; insulation resistance: ≥1000MΩ; withstanding voltage: 800V AC/minute; applicable PCB thickness: 1.6mm. Product surfaces shall be free from harmful defects, contamination, cracks, and mechanical damage; contacts shall show no corrosion, plating oxidation, or peeling; identical specifications shall be interchangeable. Regarding packaging: plastic parts shall be inner-packed in plastic bags; terminals shall be inner-packed in tape-and-reel format, labeled with product name, specification, quantity, and date of manufacture; outer packaging shall be cartons affixed with packing lists indicating relevant information, with no movement of products inside the carton. Transportation by any means is permitted, provided the products are protected from moisture and mechanical damage. For storage, packaged connectors shall be stored in a warehouse maintained at -10℃~+40℃, relative humidity ≤80%, and free from acidic, alkaline, and other corrosive gases in the surrounding air.

Key features

• Temperature Range: -25℃~85℃
• Rated Voltage: 250V AC/DC
• Rated Current: 3A AC/DC
• Contact Resistance: ≤0.02Ω
• Insulation Resistance: ≥1000MΩ
• Withstanding Voltage: 800V AC/minute
• Applicable PCB Thickness: 1.6mm
• Applicable Wire Gauge: AWG#28~#22