PHB2.0-2x6PZZDK

This specification applies to the production and inspection of standard series strip connectors (pin headers). The product technical requirements are as follows: materials and plating are specified in the attached table; plastic part surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, and deformation; gates shall be free from drag marks, flash, or short shots; terminal surfaces shall be free from oxidation and plating defects. The temperature range is -25℃~85℃, rated voltage is 250V AC/DC, rated current is 3A AC/DC, contact resistance ≤0.02Ω, insulation resistance ≥1000MΩ, withstanding voltage is 800V AC/minute, and the applicable PCB thickness is 1.6mm. Regarding operating conditions, the ambient temperature is -25℃~+85℃, applicable wire gauge is AWG#28~#22, and applicable PCB thickness is 1.2~1.6mm. Product surfaces shall be free from harmful defects, contamination, cracks, and mechanical damage; contacts shall be free from corrosion, plating oxidation, and peeling; external dimensions shall conform to the attached drawings; identical specifications shall be interchangeable. Regarding packaging, plastic parts shall be inner-packaged in plastic bags, and terminals shall be inner-packaged in tape-and-reel format; a certificate of conformance shall be included (or affixed), indicating product name, specification/model, quantity, and date of manufacture; outer packaging shall be cartons with a packing list affixed, indicating product name, specification/model, quantity, and shipment date; products shall not shift inside the carton. Transportation by any means is permitted, but products shall not be exposed to moisture or mechanical damage. For storage, packaged connectors shall be stored in a warehouse where the ambient temperature is -10℃~+40℃, relative humidity ≤80%, and the surrounding air is free from acidic, alkaline, and other corrosive gases.