PHB2.0-2x8PWZDK

The technical requirements for this strip connector (pin header) product are as follows: materials and plating specifications are detailed in the attached table; plastic surfaces shall be smooth and clean, free from burrs, bubbles, and other defects; terminal surfaces shall be free from oxidation, poor plating, and similar issues. Temperature range: -25℃~85℃; rated voltage: 250V AC/DC; rated current: 3A AC/DC; contact resistance: ≤0.02Ω; insulation resistance: ≥1000MΩ; withstanding voltage: 800V AC/minute; applicable board thickness: 1.6mm. Operating temperature: -25℃~+85℃; applicable wire gauge: AWG#28~#22. Product surfaces shall be free from harmful defects, contamination, cracks, and mechanical damage; contacts shall be free from corrosion, plating oxidation, and peeling; external dimensions shall conform to the attached drawings; identical specifications shall be interchangeable. Regarding packaging: plastic parts shall be inner-packed in plastic bags; terminals shall be inner-packed in reel tape-and-reel packaging with product information labeled; outer packaging shall use cartons with packing lists and relevant information marked, with no movement of products inside the box. Transportation by any means is permitted, but products must be protected from moisture and mechanical damage. For storage, packaged connectors shall be kept in a warehouse maintained at -10℃~+40℃, relative humidity ≤80%, and free from acidic, alkaline, and other corrosive gases.

Key features

• Temperature Range: -25℃~85℃
• Rated Voltage: 250V AC/DC
• Rated Current: 3A AC/DC
• Contact Resistance: ≤0.02Ω
• Insulation Resistance: ≥1000MΩ
• Withstanding Voltage: 800V AC/minute
• Applicable PCB Thickness: 1.6mm
• Operating Temperature Range: -25℃~+85℃
• Applicable Wire Gauge: AWG#28~#22