PHD2.0-2x3PWZMS

This specification applies to the production and inspection of standard series strip connectors (pin headers). The technical requirements are as follows: materials and plating are specified in the attached table; plastic parts shall have smooth, clean surfaces free from burrs, bubbles, burn marks, and deformation, with no pull damage, excess material, or insufficient material at gates; terminal surfaces shall be free from oxidation and poor plating. The operating temperature range is -25℃~85℃, rated voltage is 250V AC/DC, rated current is 3A AC/DC, contact resistance ≤0.02Ω, insulation resistance ≥1000MΩ, withstanding voltage is 800V AC/minute, and applicable PCB thickness is 1.6mm. Regarding operating conditions, the ambient temperature is -25℃~+85℃, applicable wire gauge is AWG#28~#22, and applicable PCB thickness is 1.2~1.6mm. In terms of appearance, the product surface shall be free from defects, dirt, cracks, and mechanical damage harmful to the product; contacts shall show no corrosion, plating oxidation, or peeling; external dimensions shall conform to the attached drawings, and identical specifications shall be interchangeable. Regarding packaging, the inner packaging for plastic parts is plastic bags, and terminals are packaged in reel tape; a certificate of conformity shall be enclosed (or affixed), indicating product name, specification/model, quantity, and production date; the outer packaging is a carton with a packing list attached, stating product name, specification/model, quantity, and shipment date, with products secured to prevent movement inside the carton. Transportation by any means is permitted, but products must be protected from moisture and mechanical damage. For storage, packaged connectors shall be stored in a warehouse with an ambient temperature of -10℃~+40℃, relative humidity ≤80%, and surrounding air free from acidic, alkaline, and other corrosive gases.