PHD2.0-2x6PZZMS

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The technical requirements are as follows: materials and plating specifications are detailed in the attached table; plastic surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, and deformation, with no pull marks, excess material, or insufficient material at gate locations; terminal surfaces shall be free from oxidation and plating defects. Operating temperature range: -25℃~85℃; rated voltage: 250V AC/DC; rated current: 3A AC/DC; contact resistance: ≤0.02Ω; insulation resistance: ≥1000MΩ; withstanding voltage: 800V AC/minute; applicable substrate thickness: 1.6mm. Operating conditions: ambient temperature -25℃~+85℃; applicable wire gauge AWG#28~#22; applicable PCB thickness 1.2~1.6mm. Product surfaces shall be free from defects, contamination, cracks, and mechanical damage that would be detrimental to the product; contacts shall show no corrosion, plating oxidation, or peeling; external dimensions shall conform to the attached drawings; products of the same specification shall be interchangeable; materials shall be per drawing. Packaging: plastic components shall be inner-packaged in plastic bags; terminals shall be inner-packaged in tape-and-reel format; each package shall include a certificate of conformance indicating product name, specification/model, quantity, and date of manufacture; outer packaging shall be cartons affixed with a packing list specifying product name, specification/model, quantity, and shipment date; products shall not rattle inside the cartons. Transportation by any means is permitted, provided products are protected from moisture and mechanical damage. Storage: fully packaged connectors shall be stored in a warehouse with ambient temperature -10℃~+40℃, relative humidity ≤80%, and surrounding air free from acidic, alkaline, or other corrosive gases.