PHD2.0-2x7PZZMS

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The product technical requirements are as follows: materials and plating are shown in the attached table; plastic part surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, and deformation, with no gate pull marks, flash, or short shots; terminal surfaces shall be free from oxidation and plating defects. Operating temperature range: -25℃~85℃; rated voltage: 250V AC/DC; rated current: 3A AC/DC; contact resistance: ≤0.02Ω; insulation resistance: ≥1000MΩ; withstanding voltage: 800V AC/minute; applicable PCB thickness: 1.6mm. Operating conditions: ambient temperature -25℃~+85℃; applicable wire gauge AWG#28~#22; applicable PCB thickness 1.2~1.6mm. Appearance: product surfaces shall be free from defects, contamination, cracks, and mechanical damage harmful to the product; contacts shall be free from corrosion, plating oxidation, and peeling; outer dimensions shall conform to the attached drawings; identical specifications shall be interchangeable. Packaging: plastic parts shall be inner-packed in plastic bags; terminals shall be inner-packed in tape-and-reel packaging; each package shall include a certificate of conformance indicating product name, specification/model, quantity, and production date; outer packaging shall be cartons with a packing list indicating product name, specification/model, quantity, and shipment date; products shall not rattle inside the carton. Transportation by any means is permitted, but products must be kept dry and protected from mechanical damage. Storage: packaged connectors shall be stored in a warehouse with ambient temperature -10℃~+40℃, relative humidity ≤80%, and no acidic, alkaline, or other corrosive gases in the surrounding air.