SH-MX3.0-3Y

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The technical requirements are as follows: materials and plating are specified in the attached table; plastic parts shall have smooth, clean surfaces free from burrs, bubbles, scorch marks, and deformation; gate areas shall be free from drag marks, flash, or short shots; terminal surfaces shall be free from oxidation and plating defects. Applicable wire gauge: AWG#28~#22; rated voltage: 250VAC/DC; rated current: 5A; dielectric withstanding voltage: 1000V AC/minute; temperature range: -25℃~+85℃; insulation resistance: ≥1000MΩ; contact resistance: ≤0.015Ω. Product surfaces shall be free from defects, contamination, cracks, and mechanical damage that would be detrimental to the product; contacts shall be free from corrosion, plating oxidation, and peeling; outer dimensions shall conform to the attached drawings; identical specifications shall be interchangeable. Regarding packaging: the inner packaging for plastic parts shall be plastic bags; the inner packaging for terminals shall be reel tape-and-reel packaging, labeled with product name, specification/model, quantity, and production date; the outer packaging shall be cartons with packing lists attached, labeled with product name, specification/model, quantity, and shipment date; products shall not shift inside the carton. Transportation by any means is permitted, provided products are protected from moisture and mechanical damage. For storage, finished packaged connectors shall be stored in a warehouse with ambient temperature of -10℃~+40℃, relative humidity ≤80%, and surrounding air free from acidic, alkaline, or other corrosive gases.