SH-MX3.0-5Y

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The technical requirements are as follows: materials and plating are specified in the attached table; plastic surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, deformation, and other defects, with no gate pull marks, flash, or short shots; terminal surfaces shall be free from oxidation, and plating shall be free from defects. Applicable wire gauge: AWG#28~#22; rated voltage: 250VAC/DC; rated current: 5A; dielectric withstanding voltage: 1000V AC/minute; temperature range: -25℃~+85℃; insulation resistance: ≥1000MΩ; contact resistance: ≤0.015Ω. Product surfaces shall be free from defects, dirt, cracks, and mechanical damage harmful to the product; contacts shall be free from corrosion, plating oxidation, and peeling; outer dimensions shall comply with the attached drawings; identical specifications shall be interchangeable. Regarding packaging: the inner packaging for plastic parts shall be plastic bags; the inner packaging for terminals shall be reel tape-and-reel packaging; a certificate of conformance shall be included (or affixed), indicating product name, specification/model, quantity, and production date; the outer packaging shall be cartons with a packing list affixed, indicating product name, specification/model, quantity, and shipping date, with products secured to prevent movement inside the carton. Transportation by any means is permitted, but products must be protected from moisture and mechanical damage. For storage, packaged connectors shall be stored in a warehouse with an ambient temperature of -10℃~+40℃, relative humidity ≤80%, and surrounding air free from acidic, alkaline, and other corrosive gases.