SH-MX3.0-6Y

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The product technical requirements are as follows: - Materials and plating: refer to the attached table. - Plastic part surfaces shall be smooth and clean, free from burrs, bubbles, burn marks, and deformation; gates shall be free from drag marks, flash, or short shots. - Terminal surfaces shall be free from oxidation and plating defects. - Applicable wire gauge: AWG#28~#22. - Rated voltage: 250V AC/DC. - Rated current: 5A. - Withstanding voltage: 1000V AC/minute. - Temperature range: -25℃~+85℃. - Insulation resistance: ≥1000MΩ. - Contact resistance: ≤0.015Ω. - Ambient temperature: -25℃~+85℃. - Applicable PCB thickness: 1.2~1.6mm. - Product surfaces shall be free from defects, contamination, cracks, and mechanical damage harmful to the product; contacts shall be free from corrosion, plating oxidation, and peeling. - Outline dimensions shall conform to the attached drawing; identical specifications shall be interchangeable. - Packaging: inner packaging for plastic parts shall be plastic bags; inner packaging for terminals shall be tape-and-reel; each package shall include (or be labeled with) a certificate of conformance indicating product name, specification/model, quantity, and manufacturing date; outer packaging shall be cartons with a packing list indicating product name, specification/model, quantity, and shipping date; products shall not shift inside the carton. - Transportation: any mode of transportation is permitted; protect from moisture and mechanical damage. - Storage: packaged connectors shall be stored in a warehouse with ambient temperature -10℃~+40℃, relative humidity ≤80%, and surrounding air free from acidic, alkaline, or other corrosive gases.