SH-ZZ0126-4

This specification applies to the production and inspection of the company's standard series strip connectors (pin headers). The product surface shall be free from defects, contamination, cracks, and mechanical damage that would be detrimental to the product; contacts shall show no signs of corrosion, oxidation of plating, or plating peeling. External dimensions shall conform to the attached drawings, and units of the same specification shall be interchangeable. Inner packaging for plastic parts consists of plastic bags; inner packaging for terminals consists of reel tape packaging. A certificate of conformance shall be included (or affixed), indicating product name, specification/model, quantity, and date of manufacture. Outer packaging consists of cartons with a packing list affixed, stating product name, specification/model, quantity, and shipping date; products shall not shift inside the carton. Transportation by any means is permitted; protect from moisture and mechanical damage. Packaged connectors shall be stored in a warehouse where the ambient temperature is -10℃~+40℃, relative humidity ≤80%, and the surrounding air is free from acidic, alkaline, or other corrosive gases.

Key features

• Material: See attached table
• Plating: See attached table
• Plastic surface shall be smooth and clean, free from burrs, bubbles, burn marks, deformation, gate damage, flash, or short shots
• Terminal surface free from oxidation or plating defects
• Compatible PCB thickness: 1.2mm~1.6mm
• Temperature range: -25℃~85℃
• Rated voltage: 250V AC/DC
• Rated current: 3A
• Contact resistance: ≤0.02Ω
• Insulation resistance: ≥100MΩ
• Withstanding voltage: 1000V AC/minute
• Applicable wire gauge: AWG#30~#22