SN65C3222DWR

The SN65C3222 and SN75C3222 consist of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The devices provide the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 1 Mbit/s and a driver output slew rate of 24 V/μs to 150 V/μs. The SN65C3222 and SN75C3222 can be placed in the power-down mode by setting PWRDOWN low, which draws only 1 μA from the power supply. When the devices are powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled, V+ is lowered to VCC, and V- is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting EN high.

Applications

• Battery-Powered Systems, PDAs
• Notebooks, Laptops, Palmtop PCs, and Hand-Held Equipment

Key features

• Operates With 3-V to 5.5-V VCC Supply
• Operates Up To 1 Mbit/s
• Low Standby Current ... 1 μA Typ
• External Capacitors ... 4 x 0.1 μF
• Accepts 5-V Logic Input With 3.3-V Supply
• RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM)