SN65LVDM176DR

The SN65LVDM176 is a differential line driver and receiver configured as a transceiver that uses low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbit/s. These circuits are similar to TIA/EIA-644 standard compliant devices (SN65LVDS) counterparts except that the output current of the drivers is doubled. This modification provides a minimum differential output voltage magnitude of 247 mV into a 50-Ω load and allows double-terminated lines and half-duplex operation. The receivers detect a voltage difference of less than 50 mV with up to 1 V of ground potential difference between a transmitter and receiver. The intended application of this device and signaling technique is for half-duplex or multiplex baseband data transmission over controlled impedance media of approximately 100-Ω characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. The SN65LVDM176 is characterized for operation from -40 ℃ to 85 ℃.

Applications

• Half-duplex or multiplexed baseband data transmission
• Compatible with controlled-impedance transmission media with characteristic impedance of approximately 100Ω, including PCB traces, backplanes, and cables

Key features

• Low-Voltage Differential Driver and Receiver for Half-Duplex Operation Designed for Signaling Rates of 400 Mbit/s
• ESD Protection Exceeds 15 kV on Bus Pins
• Operates From a Single 3.3-V Supply
• Low-Voltage Differential Signaling With Typical Output Voltages of 350 mV and a 50-Ω Load
• Valid Output With as Little as 50 mV Input Voltage Difference
• Propagation Delay Times – Driver: 1.7 ns Typ – Receiver: 3.7 ns Typ
• Power Dissipation at 200 MHz – Driver: 50 mW Typical – Receiver: 60 mW Typical
• LVTTL Levels Are 5-V Tolerant
• Bus Pins Are High Impedance When Disabled or With Vcc Less Than 1.5 V
• Open-Circuit Fail-Safe Receiver
• Surface-Mount Packaging – D Package (SOIC) – DGK Package (MSOP)