SN74ABT540NSR

4.5V~5.5V 8 4.8ns@5V,50pF SOIC-20-208mil Buffers, Drivers, Receivers, Transceivers RoHS

SOIC-20-208milROHS3 CompliantActive

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Manufacturer: TI
Manufacturer part #: SN74ABT540NSR
Store part #: C2869810
Package / case: SOIC-20-208mil
Category: Buffers, Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

21 in stock

#C2869810

Stock & price checked 2 days ago

Quantity	Unit price	Pack price
1+	₹285.90	₹285.90
10+	₹279.19	₹2,791.90
30+	₹274.80	₹8,244.00
100+	₹270.39	₹27,039.00

Quantity (min 1)

1 × ₹285.90

₹285.90

excl. GST

₹337.36 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 2,000 per reel

SN74ABT540NSR

₹285.90 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Function: Power shutdown protection
Current - Output High(IOH): 32mA
Series: 74ABT
Output Logic Level - Low: 550mV
Voltage - Supply: 4.5V~5.5V
Input Logic Level - High: 2V
Current - Output Low(IOL): 64mA
Input Logic Level -Low: 800mV
Operating Temperature: -40℃~+85℃
Number of Gates: 8
Quiescent Supply Current: 250uA
Propagation Delay: 4.8ns@5V,50pF
Output Logic Level - High: 2V

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 2,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 2.717 g

Overview

The ’ABT540 octal buffers and line drivers are ideal for driving bus lines or buffer memory address registers. The devices feature inputs and outputs on opposite sides of the package that facilitate printed circuit board layout. The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all corresponding outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE(overline) should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.