SN74AVC32T245NMJR

380Mbps 4 8 BGA-96 Buffers, Drivers, Receivers, Transceivers RoHS

BGA-96ROHS3 CompliantActive

32-bit dual-supply bus transceiver with configurable voltage conversion, level shifting, and three-state outputs

Manufacturer: TI
Manufacturer part #: SN74AVC32T245NMJR
Store part #: C2864491
Package / case: BGA-96
Category: Buffers, Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

97 in stock

#C2864491

Stock & price checked 6 days ago

Quantity	Unit price	Pack price
1+	₹512.34	₹512.34
10+	₹440.78	₹4,407.80
30+	₹398.08	₹11,942.40
100+	₹355.15	₹35,515.00
500+	₹335.20	₹1,67,600.00
1,000+	₹326.32	₹3,26,320.00

Quantity (min 1)

1 × ₹512.34

₹512.34

excl. GST

₹604.56 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 1,000 per reel

SN74AVC32T245NMJR

₹512.34 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Function: Power-off protection;Output enable high-impedance
Voltage - Supply: 1.2V~3.6V;1.2V~3.6V
Data Rate: 380Mbps
Output Type: Tri-State
Channel Type: Bidirectional
Number of Elements: 4
Operating Temperature: -40℃~+85℃
Number of Gates: 8

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 1,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.311 g

Overview

This 32-bit non-inverting bus transceiver uses two separate configurable power supply rails. The SN74AVC32T245 is optimized for operation with VCCA/VCCB set in the range of 1.4V to 3.6V. The device can operate with VCCA/VCCB as low as 1.2V. Port A is designed to track VCCA. VCCA accepts any supply voltage in the range of 1.2V to 3.6V. Port B is designed to track VCCB. VCCB accepts any supply voltage in the range of 1.2V to 3.6V, enabling universal low-voltage bidirectional translation between the 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V voltage nodes in any combination. The SN74AVC32T245 is designed for asynchronous communication between data buses. Depending on the logic level at the direction control (DIR) input, the device transmits data from the A bus to the B bus, or from the B bus to the A bus. The output enable (OE) input can disable the outputs, effectively isolating the buses. The SN74AVC32T245 is designed so that the control pins (1DIR, 2DIR, 3DIR, 4DIR, 1OE, 2OE, 3OE, and 4OE) are powered by VCCA. The device is fully specified for partial-power-down applications using Ioff. The Ioff circuit disables the outputs, preventing damaging backflow current through the device when it is powered down. The VCC isolation feature ensures that if either VCC is grounded, both ports are placed in a high-impedance state. To ensure a high-impedance state during power-up or power-down, OE should be connected to VCC through a pullup resistor; the minimum value of this resistor is determined by the current-sinking capability of the driver.

Applications

Consumer Electronics
Industrial
Enterprise Telecommunications

Key features

Control input levels VIH/VIL referenced to VCCA voltage
VCC isolation feature – if any VCC input is tied to GND, both ports enter high-impedance state
Overvoltage-tolerant I/Os enable mixed-voltage data communication
Fully configurable dual-rail design supporting full supply voltage range of 1.2V to 3.6V on each port independently
Ioff supports partial power-down mode operation
I/Os tolerant up to 4.6V
Maximum data rates:
380Mbps (1.8V to 3.3V level translation)
200Mbps (below 1.8V to 3.3V level translation)
200Mbps (translation to 2.5V or 1.8V)
150Mbps (translation to 1.5V)
100Mbps (translation to 1.2V)
Latch-up performance exceeds 100mA per JESD 78 Class II
ESD protection exceeds JESD 22 specifications