SN74LVT16240DGGR

2.7V~3.6V 4ns@3.3V,50pF TSSOP-48-6.1mm Buffers, Drivers, Receivers, Transceivers RoHS

TSSOP-48-6.1mmROHS3 CompliantActive

3.3-V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Manufacturer: TI
Manufacturer part #: SN74LVT16240DGGR
Store part #: C2867138
Package / case: TSSOP-48-6.1mm
Category: Buffers, Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

33 in stock

#C2867138

Stock & price checked 3 days ago

Quantity	Unit price	Pack price
1+	₹214.70	₹214.70
10+	₹209.70	₹2,097.00
30+	₹206.44	₹6,193.20
100+	₹203.17	₹20,317.00

Quantity (min 1)

1 × ₹214.70

₹214.70

excl. GST

₹253.35 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 2,000 per reel

SN74LVT16240DGGR

₹214.70 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Function: Power shutdown protection
Current - Output High(IOH): 32mA
Series: 74LVT
Voltage - Supply: 2.7V~3.6V
Output Logic Level - Low: 550mV
Input Logic Level - High: 2V
Current - Output Low(IOL): 64mA
Input Logic Level -Low: 800mV
Operating Temperature: -40℃~+85℃
Quiescent Supply Current: 190uA
Propagation Delay: 4ns@3.3V,50pF
Output Logic Level - High: 2V

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 2,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.23 g

Overview

The LVT16240 devices are 16-bit buffers and line drivers designed specifically for low-voltage (3.3-V) VCC operation while providing TTL interface capability to 5-V system environments. These devices are designed to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. The devices provide inverting outputs and symmetrical active-low output-enable (OE) inputs. When VCC is between 0 V and 1.5 V, the device is in a high-impedance state during power-up or power-down. To ensure the high-impedance state when VCC is above 1.5 V, OE must be connected to VCC through a pullup resistor; the minimum resistor value is determined by the current-sinking capability of the driver. These devices are designed with Ioff and power-up 3-state circuitry, fully specified for hot-insertion applications. The Ioff circuit disables the outputs to prevent damaging backflow current through the device when it is powered down. The power-up 3-state circuit places the outputs in a high-impedance state during power-up and power-down to avoid drive conflicts. The SN74LVT16240 is characterized for operation from -40°C to 85°C.

Key features

Member of Texas Instruments Widebus™ family
Designed with Advanced BiCMOS Technology (ABT), supports 3.3V operation with low quiescent power consumption
Mixed-mode signal operation supported (5V input and output voltage at VCC = 3.3V)
Supports unregulated battery operation down to 2.7V
Typical output ground bounce (VOLP) less than 0.8V at VCC = 3.3V, TA = 25℃
Ioff and power-up 3-state support hot insertion
Distributed VCC and ground pins minimize high-speed switching noise
Flow-through architecture optimizes PCB layout
Latch-up performance exceeds 100mA per JESD 78 Class II requirements
ESD protection exceeds JESD 22 requirements
Meets 2000-V Human Body Model (A114-A)
Meets 200-V Machine Model (A115-A)
Meets 1000-V Charged Device Model (C101)
Available in multiple package options: Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and 380-mil Fine-Pitch Ceramic Flat (WD) with 25-mil pin pitch