STPM34TR
2.95V~3.65V 4.3mA QFN-32-EP(5x5) Energy Metering RoHS
ASSP for metering applications with four independent 24-bit 2nd order sigma-delta ADCs, 4 MHz OSF and 2 embedded PGLNA
- Manufacturer
- ST
- Manufacturer part #
- STPM34TR
- Store part #
- C129475
- Package / case
- QFN-32-EP(5x5)
- Category
- Energy Metering
- Packaging
- Tape & Reel (TR)
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement · policy
244 in stock
#C129475
Stock & price checked 5 days ago
| Quantity | Unit price | Pack price |
|---|---|---|
| 1+ | ₹347.29 | ₹347.29 |
| 10+ | ₹294.75 | ₹2,947.50 |
| 30+ | ₹261.82 | ₹7,854.60 |
| 100+ | ₹228.26 | ₹22,826.00 |
| 500+ | ₹212.99 | ₹1,06,495.00 |
| 1,000+ | ₹206.45 | ₹2,06,450.00 |
1 × ₹347.29
₹347.29
excl. GST
₹409.80 incl. 18% GST
- Dispatch in 15-18 working days
- GST invoice with every order
- Standard pack: 3,000 per reel
STPM34TR
₹347.29 for 1 + GST
Specifications
- Clock Frequency
- 16MHz
- Tolerance
- 0.1%
- Operating Temperature
- -40℃~+85℃
- Voltage Reference Value
- 1.18V
- Voltage - Supply
- 2.95V~3.65V
- Dynamic Range
- 5000:1
- Function
- Programmable gain;Pulse output;Built-in reference source;Built-in digital filter;Energy accumulation engine;Fault detection;Interrupt control;Digital calibration and compensation
- Number of Channels
- 4
- Interface
- SPI;UART
- Meter Type
- Single-Phase Energy Metering IC
- Current - Supply
- 4.3mA
Packaging & compliance
- RoHS
- ROHS3 Compliant
- Lifecycle
- Active
- ECCN
- EAR99
- Packaging
- Tape & Reel (TR)
- Standard pack
- 3,000 / Reel
- Sold per
- Piece
- Minimum order
- 1
- Unit weight
- 0.246 g
Overview
The STPM3x is an ASSP family designed for high accuracy measurement of power and energies in power line systems using the Rogowski coil, current transformer or shunt current sensors. The STPM3x provides instantaneous voltage and current waveforms and calculates RMS values of voltage and currents, active, reactive and apparent power and energies. The STPM3x is a mixed signal IC family consisting of an analog and a digital section. The analog section consists of up to two programmable gain low-noise low-offset amplifiers and up to four 2nd order 24-bit sigmadelta ADCs, two bandgap voltage references with independent temperature compensation, a low drop voltage regulator and DC buffers. The digital section consists of digital filtering stage, a hardwired DSP, DFE to the input and a serial communication interface (UART or SPI). The STPM3x is fully configurable and allows a fast digital system calibration in a single point over the entire current dynamic range.
Key features
- Active power accuracy: -0.1% error over 5000:1 dynamic range, -0.5% error over 10000:1 dynamic range. Exceeds 50 - 60 Hz EN 50470-x, IEC 62053-2x, ANSI12.2x standard requirements for AC watt meters
- Reactive power accuracy: -0.1% error over 2000:1 dynamic range. Dual mode apparent energy calculation
- Instantaneous and averaged power
- RMS and instantaneous voltage and current. Under and overvoltage detection (sag and swell) and monitoring. Overcurrent detection and monitoring
- UART and SPI serial interface with programmable CRC polynomial verification
- Programmable LED and interrupt outputs
- Four independent 24-bit 2nd order sigma-delta ADCs
- Two programmable gain chopper stabilized low-noise and low-offset amplifiers
- Bandwidth 3.6 kHz - 3 dB
- Vcc supply range 3.3 V ±10%
- Supply current Icc 4.3 mA (STPM32)
- Input clock frequency 16 MHz, Xtal or external source
- Twin precision voltage reference: 1.18 V with independent programmable TC, 30 ppm/°C typ.
- Internal low drop regulator
- QFN packages
- Operating temperature from -40 °C to +85 °C
Alternatives
Similar parts — check the datasheet before substituting.
Same category
