TLIN1022DMTRQ1

The TLIN1022-Q1 is a dual LIN physical layer transceiver with integrated wake-up and protection features, compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and ISO/DIS 17987–4.2 standards. LIN is a single-wire bidirectional bus commonly used in low-speed in-vehicle networks, supporting data rates up to 20kbps. The TLIN1022-Q1 is designed for 12V applications with a wider operating voltage range and enhanced bus fault protection. The LIN receiver supports in-line programming applications at data rates up to 100kbps. The TLIN1022-Q1 uses a current-limiting waveshaping driver to reduce EME, converting the LIN protocol data stream on the TXD input into LIN bus signals. The receiver converts the data stream into logic-level signals, which are transmitted to the microprocessor via the open-drain RXD pin. Sleep mode enables ultra-low current consumption, with wake-up capability via the LIN bus or pin.

Applications

• Body electronics and lighting
• Hybrid electric vehicles and powertrain systems
• Infotainment systems and instrument clusters
• Appliances

Key features

• AEC-Q100 qualified for automotive applications
• Temperature: -40°C to 125°C (ambient)
• HBM qualification level: ±8kV
• CDM qualification level: ±1.5kV
• Compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and ISO/DIS 17987-4.2
• Meets SAEJ2602 recommended practice requirements for LIN
• Supports 12V battery applications
• LIN data rate up to 20kbps
• Wide operating range – 4V to 36V supply voltage, ±45V LIN bus fault protection
• Sleep mode: ultra-low current consumption, supporting the following wake-up events:
• LIN bus local wake-up via EN pin
• Glitch-free operation during power-up and power-down
• Protection features:
• VSUP undervoltage protection
• TXD dominant timeout (DTO) protection
• Thermal shutdown protection
• System-level unpowered node or ground disconnection fault protection
• Available in SOIC (14) and leadless VSON (14) packages with enhanced AOI capability
• Simplified schematic, commander mode