TLIN1029MDRBRQ1

The TLIN1029-Q1 is a Local Interconnect Network (LIN) physical layer transceiver that integrates wake-up and protection functions and is compatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and ISO/DIS 17987–4.2 standards. LIN is a single-wire bidirectional bus commonly used in in-vehicle networks with data transfer rates of up to 20 kbps. The TLIN1029-Q1 is designed to support 12V applications, featuring a wider operating voltage range and additional bus fault protection. The LIN receiver supports data transfer rates of up to 100 kbps, enabling faster in-line programming. The TLIN1029-Q1 uses a current-limiting waveform shaping driver that reduces electromagnetic emissions (EME) to convert the data stream on the TXD input into a LIN bus signal. The receiver converts the data stream into a logic level signal, which is sent to the microprocessor through the open-drain RXD pin. The sleep mode enables ultra-low current consumption and allows wake-up via the LIN bus or the EN pin. The integrated resistors, electrostatic discharge (ESD), and fault protection functions help designers save board space in their applications.

Applications

• Body electronics and lighting
• Infotainment systems and instrument clusters
• Hybrid electric vehicle and powertrain systems
• Passive safety
• Electrical appliances

Key features

• AEC-Q100 qualified for automotive applications
• Temperature Grade 1: -40°C to 125°C TA
• Device HBM qualification level: ±8 kV
• Device CDM qualification level: ±1.5 kV
• Compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and ISO/DIS 17987-4.2
• Meets SAE J2602 recommended practice for LIN
• Supports ISO 9141 (K-Line)
• Supports 12V applications
• LIN data rate up to 20 kbps
• Wide operating range
• 4V to 36V supply voltage
• ±45V LIN bus fault protection
• Sleep mode: ultra-low current consumption
• Supports the following wake-up event types:
• LIN bus
• Local wake-up via EN pin
• Glitch-free operation during power-up and power-down
• Protection features:
• VSUP undervoltage protection
• TXD dominant timeout (DTO) protection
• Thermal shutdown protection
• System-level unpowered node or ground disconnection fail-safe
• Available in SOIC (8) and leadless VSON (8) packages with enhanced automated optical inspection (AOI) capability