TPT4032-TS3R

An enhanced RS422 device which meets standard TIA/EIA-422-B with strong ESD protection capability. The BUS-pin can pass ±18KV HBM-ESD, and ±15 kV IEC-Air Charge ESD protection. It works in wide power supply range: from 3.0V to 5.5V VCC, which design quad receiver for balanced communication. It also features the wide input common-mode voltage and higher data rate, can accept -7V~+12V common-mode differential input with 100 Ω Load and 50Mbps data rate in 5.0V power supply, required by high speed field-bus applications. The enable functions can control all four receivers and provide an active-high (EN) or active-low (/G) enable input, and they provide the high-impedance state in the power-off condition, which only consume <1uA very low current. Available in an SOP16 and TSSOP16 package, and is characterized from -40°C to 125°C.

Applications

• Field Transmitters: Temperature Sensors and Pressure Sensors
• Motor Controller and Position Encoder Systems
• Factory Automation
• Industrial Control Networks

Key features

• Meets the TIA/EIA- 422-B requirements
• High speed, up to 50Mbps data rate, and tPHL = 17 ns typical
• Low pulse distortion, tsk(p) = 0.7 ns typical
• -7V~+12V Common-Mode Range With ±200mV sensitivity
• Input Hysteresis: 40 mV typical
• Wide power supply voltage 3.0V to 5.5V
• Bus-Pin Protection:
• ±18 kV HBM protection ±10 kV IEC-Contact ESD
• ±15 kV IEC-Air Charge ESD
• Pb-Free
• Package: SOP16, TSSOP16