TYPE-C-F27-2TDWH105

1. Materials & Surface Treatment: See list. 2. Plating Specifications: - Contacts: Overall nickel plating, minimum thickness 50 μin; gold plating on contact area; gold plating on soldering area. - Shell: Overall nickel plating, minimum thickness 30 μin. - Middle plate: Cleaning treatment only. 3. Mechanical Properties: - Insertion force: 0.5~2.0 kgf. - Withdrawal force: 0.8~2.0 kgf; 0.6~2.0 kgf after durability test. - Durability: 10,000 cycles. 4. Electrical Properties: - Rated current: 5 A max. - Rated voltage: 20 V max. - Withstanding voltage: 100 V AC. - Contact resistance: 40 mΩ max. - Insulation resistance: 10 MΩ. 5. Environmental Properties: - Operating temperature: -40°C~+85°C. - Soldering temperature: 265±5°C, 5±0.5 s. - Salt spray test: 48 hours minimum. 6. Packaging & Shipping Instructions: - Leave 10 empty carrier positions at both the beginning and end of each reel; seal the tail end with masking tape. - After filling the reel, wind one additional turn of protective tape, seal with masking tape, and apply one material label. - Stack 10 reels per set (3,000 pieces total) and pack into one outer carton. - Handle with care during loading and unloading. - Do not stack excessively during transport (maximum height 1.8 m); do not apply heavy pressure. - Drop test conditions: Finished carton free-falls from a height of 1.2 m (one corner, three edges, six faces). Products must not escape the lower carrier slots, must show no impact damage or deformation, and inner packaging materials must not be severely damaged.