TYPE-C-F27-2TDWH88-H

1. Leave 10 empty pockets at both the beginning and end of each reel; seal the tail end with masking tape. 2. After filling the reel with products, wind one additional round of leader tape, seal it with masking tape, and attach 1 material label. 3. Stack every 10 reels as one set (3,500 products total) and pack into 1 outer carton. 4. Handle with care during transportation. 5. Do not stack too high during transit (maximum 1.8 meters); do not subject to heavy pressure. 6. Drop test conditions: finished goods carton dropped in free fall from a height of 1.2 meters (1 corner, 3 edges, 6 faces): a. Products must not escape from the carrier tape pockets. b. Products must show no impact damage or deformation. c. Inner packaging materials must not be severely damaged.

Key features

• Materials & Surface Finish: See reference list.
• Plating Specifications:
• Contacts: Overall nickel plating, minimum thickness 50 μin; gold plating on mating area; gold plating on soldering area.
• Shell: Overall nickel plating, minimum thickness 30 μin.
• Middle plate: Cleaning only.
• Mechanical Properties:
• Insertion force: 0.5~2.0 kgf.
• Withdrawal force: 0.8~2.0 kgf; 0.6~2.0 kgf after durability test.
• Durability: 10000 cycles.
• Electrical Properties:
• Rated current: 5 A max.
• Rated voltage: 20 V max.
• Withstanding voltage: 100 VAC.
• Contact resistance: 40 mΩ max.
• Insulation resistance: 10 MΩ.
• Environmental Properties:
• Operating temperature: -40°C~+85°C.
• Soldering temperature: 265±5°C, 5±0.5 s.
• Salt spray test: 48 hours minimum.