TYPE-C-F30-2CBWH100-J

- Materials & surface treatment: see list; - Plating specifications: - Contacts: overall nickel plating min. 50 μin, gold plating on mating area, gold plating on soldering area; - Shell: overall nickel plating min. 30 μin; - Middle plate: cleaning only. - Mechanical performance: - Mating force: insertion force 0.5~2.0 kgf; withdrawal force 0.8~2.0 kgf, 0.6~2.0 kgf after durability test; - Durability: 10,000 cycles. - Electrical performance: - Rated current: 5A max.; - Rated voltage: 20V max.; - Withstanding voltage: 100VAC; - Contact resistance: 40mΩ max.; - Insulation resistance: 10MΩ min. - Environmental performance: - Operating temperature: -40°C~+85°C; - Soldering temperature: 265±5°C for 5±0.5s; - Salt spray test: 48 hours min. - Packaging instructions: - Leave 10 empty carrier positions at both the leading and trailing ends of each reel; seal the tail end with masking tape; - After filling the reel, wind one additional turn of protective tape, seal with masking tape, and apply 1 material label; - Every 10 reels form one set (3,000 pcs total), packed into 1 outer carton; - Handle with care during transport; - Do not stack excessively during transport (max. height 1.8 m); do not apply heavy pressure; - Drop test conditions: finished carton free-falls from 1.2 m height (one corner, three edges, six faces); products must not escape the lower carrier pockets; no damage or deformation permitted; inner packaging must not be severely damaged.