TYPE-C-FGB389

The USB TYPE-C 16-pin connector specifications are as follows: 1. Materials: - Housing and Molding: High-temperature resistant plastic, UL94 V-0 rated, black. - Contacts: Copper alloy, thickness 0.12mm. - Shell: Stainless steel SUS304-1/2H, thickness 0.30mm. - Middle Plate: Stainless steel (SUS301), thickness 0.15mm. - EMI Plate: Stainless steel (SUS301), thickness 0.10mm. 2. Plating Specifications: - Contacts: Overall nickel plating min. 50μ", gold plating on mating contact area, matte tin plating on soldering area. - Shell: Overall nickel plating min. 30μ". - Middle Plate: Cleaning only. - EMI Plate: Cleaning only. 3. Mechanical Performance: - Insertion Force: 0.5~2.0kgf. - Withdrawal Force: 0.8~2.0kgf; 0.6~2.0kgf after durability test. - Durability: 10,000 cycles. 4. Electrical Performance: - Rated Current: 5A max. - Rated Voltage: 20V max. - Withstanding Voltage: 100VAC. - Contact Resistance: 40mΩ max. - Insulation Resistance: 100MΩ min. 5. Environmental Performance: - Operating Temperature: -40°C~+85°C. - Soldering Temperature: 265±5°C, 5±0.5s. 6. Packaging and Handling Notes: - Leave ×× PCS empty at both the beginning and end of each reel; seal the tail end with masking tape. - After filling the reel, wind one additional round of protective tape, seal with masking tape, and affix one material label (1 pcs). - Stack every 10 reels as one lot (×××pcs total) and pack into one outer carton. - Handle with care during transportation. - Do not stack excessively during transit (max. height 1.8M); do not apply heavy pressure. - Drop test conditions: Finished carton free-fall from 1.2m height (one corner, three edges, six faces). Products must not escape from the lower carrier tape pockets; no impact damage or deformation permitted; inner packaging materials must not be severely damaged.