TYPE-C-FGB619

1. Materials: - Housing & Molding Material: LCP, UL94 V-0 - Contacts: Copper alloy, thickness 0.20mm - Middle Clip: SUS301-1/2H, thickness 0.15mm - Shell: SUS, thickness 0.30mm 2. Mechanical Properties: - Insertion Force: 5~20N - Extraction Force: 6~20N - Durability: 10000 cycles 3. Electrical Properties: - Rated Current: 3A/5A max - Rated Voltage: 20V max - Withstanding Voltage: 100V AC - Contact Resistance: 40mΩ max - Insulation Resistance: 100MΩ min 4. Environmental Properties: - Operating Temperature: -40°C~+85°C - Soldering Temperature: 265±5°C, 5±0.5 seconds Recommended PCB layout (thickness: 1.0~1.2mm), unspecified tolerances ±0.05mm 1. Leave 16 empty positions at both the beginning and end of each reel; seal the tail end with masking tape. 2. After filling the reel with products, wind one additional layer of protective tape, seal with masking tape, and affix 1 material label. 3. Stack every 10 reels as one bundle, totaling 15000 products, and pack into 1 outer carton. 4. Handle with care during transportation. 5. Do not stack excessively during transit (maximum height 1.8m); avoid heavy pressure. 6. Drop test conditions: Finished carton free-fall from a height of 1.2m (one corner, three edges, six faces): a. Products must not escape from the carrier tape pockets. b. Products must show no damage or deformation. c. Inner packaging materials must not be severely damaged.