UC01-0B16F100P10

1. Materials & Surface Treatment: See list. 2. Plating Specifications: - Contacts: Overall nickel plating, minimum thickness 50 μin; gold plating on mating area; gold plating on soldering area. - Shell: Overall nickel plating, minimum thickness 30 μin. - Middle plate: Cleaning only. 3. Mechanical Performance: - Insertion force: 0.5~2.0 kgf. - Withdrawal force: 0.8~2.0 kgf; 0.6~2.0 kgf after durability test. - Durability: 10,000 cycles. 4. Electrical Performance: - Rated current: 5A max. - Rated voltage: 20V max. - Withstanding voltage: 100V AC. - Contact resistance: 40 mΩ max. - Insulation resistance: 100 MΩ min. 5. Environmental Performance: - Operating temperature: -40°C~+85°C. - Solder dip temperature: 265±5°C, 5±0.5 seconds. - Salt spray test: 48 hours min. 6. Notes: - Leave 10 empty pitches at both the beginning and end of each reel; seal the tail end with masking tape. - After filling the reel with products, wind one additional layer of protective tape, seal with masking tape, and apply 1 material label. - Stack 10 reels per set, totaling 2,500 pieces, and pack into 1 outer carton. - Handle with care during transport. - Do not stack too high during shipping (maximum 1.8 m); do not place heavy loads on top. - Drop test conditions: Finished carton free-falls from a height of 1.2 m; products must not fall out of the carrier tape pockets; products must show no damage or deformation; inner packaging materials must not be severely damaged.