UC01-0B16F105P10

1. Leave 10 empty pockets at both the beginning and end of each reel; seal the tail end with masking tape. 2. After filling the reel with products, wind one additional round of protective tape, seal it with masking tape, and affix 1 material label. 3. Stack every 10 reels as one set (3,000 pieces total) and pack into 1 outer carton. 4. Handle with care during transportation. 5. Do not stack too high during transit (maximum 1.8 meters); do not apply heavy pressure. 6. Drop test conditions: finished goods carton free-falls from a height of 1.2 meters (1 corner, 3 edges, 6 faces): a. Products must not escape from the carrier tape pockets. b. Products must show no impact damage or deformation. c. Inner packaging materials must not be severely damaged.

Key features

• Materials & Surface Treatment: See list.
• Plating Specifications:
• Contacts: Overall nickel plating min. 50 µin, gold plating on contact mating area, gold plating on solder area.
• Shell: Overall nickel plating min. 30 µin.
• Middle Plate: Cleaning treatment only.
• Mechanical Properties:
• Insertion Force: 0.5~2.0 kgf.
• Withdrawal Force: 0.8~2.0 kgf, 0.6~2.0 kgf after durability test.
• Durability: 10000 cycles.
• Electrical Properties:
• Rated Current: 5 A max.
• Rated Voltage: 20 V max.
• Withstanding Voltage: 100 V AC.
• Contact Resistance: 40 mΩ max.
• Insulation Resistance: 100 MΩ min.
• Environmental Properties:
• Operating Temperature: -40°C~+85°C.
• Solder Dip Temperature: 265±5°C, 5±0.5 sec.
• Salt Spray Test: 48 hours min.